For our new friends:

Every app needs authentication and authorization. Logto is an Auth0 alternative designed for modern apps and SaaS products.

In this article, we will go through the steps to quickly build the SendGrid sign-in experience (user authentication) with .NET Core (Razor Pages) and  Logto.

Prerequisites

• A running Logto instance. Check out the introduction page to get started.
• Basic knowledge of .NET Core (Razor Pages).
• A usable SendGrid account.

Create an application in Logto

In you browser, open a new tab and enter the link of Logto Admin Console.

Once the page is loaded, in the "Get Started" section click the View all link to open the application framework list page.

Choose your application type

In the opening modal, scroll to the "Traditional web" section or filter all the available " Traditional web" frameworks using the quick filter checkboxes on the left.

Click the ".NET Core (Razor Pages)" framework card to start creating your application.

Enter application name

Enter the application name, e.g., "Bookstore," and click "Create application."

🎉 Ta-da! You just created your first application in Logto. You'll see a congrats page which includes a detailed integration guide. Follow the guide to see what the experience will be in your application.

Integrate Logto SDK

tip:

• The following demonstration is built on .NET Core 8.0. The SDK is compatible with .NET 6.0 or higher.
• The .NET Core sample projects are available in the GitHub repository.

Installation

Add the NuGet package to your project:

dotnet add package Logto.AspNetCore.Authentication

Add Logto authentication

Open Startup.cs (or Program.cs) and add the following code to register Logto authentication services:

Program.cs

using Logto.AspNetCore.Authentication;

var builder = WebApplication.CreateBuilder(args);

builder.Services.AddLogtoAuthentication(options =>
{
  options.Endpoint = builder.Configuration["Logto:Endpoint"]!;
  options.AppId = builder.Configuration["Logto:AppId"]!;
  options.AppSecret = builder.Configuration["Logto:AppSecret"];
});

The AddLogtoAuthentication method will do the following things:

• Set the default authentication scheme to LogtoDefaults.CookieScheme.
• Set the default challenge scheme to LogtoDefaults.AuthenticationScheme.
• Set the default sign-out scheme to LogtoDefaults.AuthenticationScheme.
• Add cookie and OpenID Connect authentication handlers to the authentication scheme.

Sign-in and sign-out flows

Before we proceed, there are two confusing terms in the .NET Core authentication middleware that we need to clarify:

1. CallbackPath: The URI that Logto will redirect the user back to after the user has signed in (the "redirect URI" in Logto)
2. RedirectUri: The URI that will be redirected to after necessary actions have been taken in the Logto authentication middleware.

The sign-in process can be illustrated as follows:

Similarly, .NET Core also has SignedOutCallbackPath and RedirectUri for the sign-out flow.

For the sack of clarity, we'll refer them as follows:

Term we use	.NET Core term
Logto redirect URI	CallbackPath
Logto post sign-out redirect URI	SignedOutCallbackPath
Application redirect URI	RedirectUri

Regarding redirect-based sign-in

1. This authentication process follows the OpenID Connect (OIDC) protocol, and Logto enforces strict security measures to protect user sign-in.
2. If you have multiple apps, you can use the same identity provider (Logto). Once the user signs in to one app, Logto will automatically complete the sign-in process when the user accesses another app.

To learn more about the rationale and benefits of redirect-based sign-in, see Logto sign-in experience explained.

Configure redirect URIs

note:

In the following code snippets, we assume your app is running on http://localhost:3000/.

First, let's configure the Logto redirect URI. Add the following URI to the "Redirect URIs" list in the Logto application details page:

http://http://localhost:3000//Callback

To configure the Logto post sign-out redirect URI, add the following URI to the "Post sign-out redirect URIs" list in the Logto application details page:

http://http://localhost:3000//SignedOutCallback

Change the default paths

The Logto redirect URI has a default path of /Callback, and the Logto post sign-out redirect URI has a default path of /SignedOutCallback.

You can leave them as are if there's no special requirement. If you want to change it, you can set the CallbackPath and SignedOutCallbackPath property for LogtoOptions:

Program.cs

builder.Services.AddLogtoAuthentication(options =>
{
  // Other configurations...
  options.CallbackPath = "/Foo";
  options.SignedOutCallbackPath = "/Bar";
});

Remember to update the value in the Logto application details page accordingly.

Implement sign-in/sign-out buttons

First, add the handler methods to your PageModel, for example:

Pages/Index.cshtml.cs

public class IndexModel : PageModel
{
  public async Task OnPostSignInAsync()
  {
    await HttpContext.ChallengeAsync(new AuthenticationProperties
    {
      RedirectUri = "/"
    });
  }

  public async Task OnPostSignOutAsync()
  {
    await HttpContext.SignOutAsync(new AuthenticationProperties
    {
      RedirectUri = "/"
    });
  }
}

Then, add the buttons to your Razor page:

Pages/Index.cshtml

<p>Is authenticated: @User.Identity?.IsAuthenticated</p>
<form method="post">
  @if (User.Identity?.IsAuthenticated == true) {
    <button type="submit" asp-page-handler="SignOut">Sign out</button>
  } else {
    <button type="submit" asp-page-handler="SignIn">Sign in</button>
  }
</form>

It will show the "Sign in" button if the user is not authenticated, and show the "Sign out" button if the user is authenticated.

Test your integration:

Open your .NET Core (Razor Pages) app to test if the integration works. When you click the "Sign In" button, the page should be redirected to a Logto sign-in page, and you should be able to create a new account by entering username and password and complete the sign-in process.

Add SendGrid connector

To add or change Email connector, go to the "Connector" tab in the Admin Console, then click on "Email and SMS connectors". From there, click "Set up" or go to detail page and click "Change Email connector".

In the openning modal, select "SendGrid" and click "Next".

On the next page, you will see a two-column layout with the README content on the left and configuration on the right.

Feel free to follow the README file in place or read the following section to complete the configuration process. If you follow the in-place guide, you can skip the next section.

Set up SendGrid email connector

Register SendGrid account

Create a new account at SendGrid website. You may skip this step if you've already registered an account.

Verify senders

Go to the SendGrid console page and sign in with your SendGrid account.

Senders indicate the addresses our verification code email will be sent from. In order to send emails via the SendGrid mail server, you need to verify at least one sender.

Starting from the SendGrid console page, go to "Settings" -> "Sender Authentication" from the sidebar.

Domain Authentication is recommended but not obligatory. You can click "Get Started" in "Authenticate Your Domain" card and follow the upcoming guide to link and verify a sender to SendGrid.

By clicking the "Verify a Single Sender" button in the panel, you are now focusing on a form requiring some critical information to create a sender. Follow the guide, fill out all these fields, and hit the "Create" button.

After the single sender is created, an email with a verification link should be sent to your sender's email address. Go to your mailbox, find the verification mail and finish verifying the single sender by clicking the link given in the email. You can now send emails via SendGrid connector using the sender you've just verified.

Create API keys

Let's start from the SendGrid console page, go to "Settings" -> "API Keys" from the sidebar.

Click the "Create API Key" in the top-right corner of the API Keys page. Type in the name of the API key and customize "API Key Permission" per your use case. A global Full Access or Restricted Access with full access to Mail Send is required before sending emails with this API key.

The API Key is presented to you on the screen as soon as you finished the Create API Key process. You should save this API Key somewhere safe because this is the only chance that you can see it.

Configure your connector

Fill out the apiKey field with the API Key created in "Create API keys" section.

Fill out the fromEmail and fromName fields with the senders' From Address and Nickname. You can find the sender's details on the "Sender Management" page. fromName is OPTIONAL, so you can skip filling it.

You can add multiple SendGrid mail connector templates for different cases. Here is an example of adding a single template:

• Fill out the subject field, which works as the title of emails.
• Fill out the content field with arbitrary string-typed contents. Do not forget to leave the {{code}} placeholder for the random verification code.
• Fill out usageType field with either Register, SignIn, ForgotPassword, Generic for different use cases.
• Fill out type field with either text/plain or text/html for different types of content.

In order to enable full user flows, templates with usageType Register, SignIn, ForgotPassword and Generic are required.

Here is an example of SendGrid connector template JSON.

[
  {
    "subject": "<register-template-subject>",
    "content": "<Logto: Your verification code is {{code}}. (register template)>",
    "usageType": "Register",
    "type": "text/plain",
  },
  {
    "subject": "<sign-in-template-subject>",
    "content": "<Logto: Your verification code is {{code}}. (sign-in template)>",
    "usageType": "SignIn",
    "type": "text/plain",
  },
  {
    "subject": "<forgot-password-template-subject>",
    "content": "<Logto: Your verification code is {{code}}. (forgot-password template)>",
    "usageType": "ForgotPassword",
    "type": "text/plain",
  },
  {
    "subject": "<generic-template-subject>",
    "content": "<Logto: Your verification code is {{code}}. (generic template)>",
    "usageType": "Generic",
    "type": "text/plain",
  },
]

Test SendGrid Email connector

You can type in an email address and click on "Send" to see whether the settings can work before "Save and Done".

That's it. Don't forget to enable connector in sign-in experience.

Config types

Name	Type
apiKey	string
fromEmail	string
fromName	string (OPTIONAL)
templates	Template[]

Template Properties	Type	Enum values
subject	string	N/A
content	string	N/A
usageType	enum string	'Register' | 'SignIn' | 'ForgotPassword' | 'Generic'
type	enum string	'text/plain' | 'text/html'

Save your configuration

Double check you have filled out necessary values in the Logto connector configuration area. Click "Save and Done" (or "Save changes") and the SendGrid connector should be available now.

Enable SendGrid connector in Sign-in Experience

Switch to the "Sign-in experience" tab, then click the "Sign-up and sign-in" tab.

note:

If it's the first time you enter the tab, you will see a quick introduction about Sign-in Experience and its basic configuration.

Select "Email address" or "Email address or phone number" for the "Sign-up identifier" to provide sign-up for Email passwordless sign-in, which may increase your conversion rate.

Finally, click "Save changes" on the bottom right corner.

Testing and Validation

Return to your .NET Core (Razor Pages) app. You should now be able to sign in with SendGrid. Enjoy!

Further readings

Protect your API For native and single page apps, you'll need to call one or more API endpoints to retrieve and update data.
Learn more about identifying who's who and keeping your API secure.

User management We know you care about user management and activities, as we also do.
Learn more about how to know your users and see the figures like DAU and MAU graphically.

Localization From one regional business to a global corporate, the willingness to offer the best user experience won't change.
You can change current language phrases or add a new language without friction.

Customer IAM series Our serial blog posts about Customer (or Consumer) Identity and Access Management, from 101 to advanced topics and beyond.