For our new friends:

Every app needs authentication and authorization. Logto is an Auth0 alternative designed for modern apps and SaaS products.

In this article, we will go through the steps to quickly build the OAuth2 sign-in experience (user authentication) with .NET Core (Razor Pages) and  Logto.

Prerequisites

• A running Logto instance. Check out the introduction page to get started.
• Basic knowledge of .NET Core (Razor Pages).
• A usable OAuth2 account.

Create an application in Logto

In you browser, open a new tab and enter the link of Logto Admin Console.

Once the page is loaded, in the "Get Started" section click the View all link to open the application framework list page.

Choose your application type

In the opening modal, scroll to the "Traditional web" section or filter all the available " Traditional web" frameworks using the quick filter checkboxes on the left.

Click the ".NET Core (Razor Pages)" framework card to start creating your application.

Enter application name

Enter the application name, e.g., "Bookstore," and click "Create application."

🎉 Ta-da! You just created your first application in Logto. You'll see a congrats page which includes a detailed integration guide. Follow the guide to see what the experience will be in your application.

Integrate Logto SDK

tip:

• The following demonstration is built on .NET Core 8.0. The SDK is compatible with .NET 6.0 or higher.
• The .NET Core sample projects are available in the GitHub repository.

Installation

Add the NuGet package to your project:

dotnet add package Logto.AspNetCore.Authentication

Add Logto authentication

Open Startup.cs (or Program.cs) and add the following code to register Logto authentication services:

Program.cs

using Logto.AspNetCore.Authentication;

var builder = WebApplication.CreateBuilder(args);

builder.Services.AddLogtoAuthentication(options =>
{
  options.Endpoint = builder.Configuration["Logto:Endpoint"]!;
  options.AppId = builder.Configuration["Logto:AppId"]!;
  options.AppSecret = builder.Configuration["Logto:AppSecret"];
});

The AddLogtoAuthentication method will do the following things:

• Set the default authentication scheme to LogtoDefaults.CookieScheme.
• Set the default challenge scheme to LogtoDefaults.AuthenticationScheme.
• Set the default sign-out scheme to LogtoDefaults.AuthenticationScheme.
• Add cookie and OpenID Connect authentication handlers to the authentication scheme.

Sign-in and sign-out flows

Before we proceed, there are two confusing terms in the .NET Core authentication middleware that we need to clarify:

1. CallbackPath: The URI that Logto will redirect the user back to after the user has signed in (the "redirect URI" in Logto)
2. RedirectUri: The URI that will be redirected to after necessary actions have been taken in the Logto authentication middleware.

The sign-in process can be illustrated as follows:

Similarly, .NET Core also has SignedOutCallbackPath and RedirectUri for the sign-out flow.

For the sack of clarity, we'll refer them as follows:

Term we use	.NET Core term
Logto redirect URI	CallbackPath
Logto post sign-out redirect URI	SignedOutCallbackPath
Application redirect URI	RedirectUri

Regarding redirect-based sign-in

1. This authentication process follows the OpenID Connect (OIDC) protocol, and Logto enforces strict security measures to protect user sign-in.
2. If you have multiple apps, you can use the same identity provider (Logto). Once the user signs in to one app, Logto will automatically complete the sign-in process when the user accesses another app.

To learn more about the rationale and benefits of redirect-based sign-in, see Logto sign-in experience explained.

Configure redirect URIs

note:

In the following code snippets, we assume your app is running on http://localhost:3000/.

First, let's configure the Logto redirect URI. Add the following URI to the "Redirect URIs" list in the Logto application details page:

http://http://localhost:3000//Callback

To configure the Logto post sign-out redirect URI, add the following URI to the "Post sign-out redirect URIs" list in the Logto application details page:

http://http://localhost:3000//SignedOutCallback

Change the default paths

The Logto redirect URI has a default path of /Callback, and the Logto post sign-out redirect URI has a default path of /SignedOutCallback.

You can leave them as are if there's no special requirement. If you want to change it, you can set the CallbackPath and SignedOutCallbackPath property for LogtoOptions:

Program.cs

builder.Services.AddLogtoAuthentication(options =>
{
  // Other configurations...
  options.CallbackPath = "/Foo";
  options.SignedOutCallbackPath = "/Bar";
});

Remember to update the value in the Logto application details page accordingly.

Implement sign-in/sign-out buttons

First, add the handler methods to your PageModel, for example:

Pages/Index.cshtml.cs

public class IndexModel : PageModel
{
  public async Task OnPostSignInAsync()
  {
    await HttpContext.ChallengeAsync(new AuthenticationProperties
    {
      RedirectUri = "/"
    });
  }

  public async Task OnPostSignOutAsync()
  {
    await HttpContext.SignOutAsync(new AuthenticationProperties
    {
      RedirectUri = "/"
    });
  }
}

Then, add the buttons to your Razor page:

Pages/Index.cshtml

<p>Is authenticated: @User.Identity?.IsAuthenticated</p>
<form method="post">
  @if (User.Identity?.IsAuthenticated == true) {
    <button type="submit" asp-page-handler="SignOut">Sign out</button>
  } else {
    <button type="submit" asp-page-handler="SignIn">Sign in</button>
  }
</form>

It will show the "Sign in" button if the user is not authenticated, and show the "Sign out" button if the user is authenticated.

Test your integration:

Open your .NET Core (Razor Pages) app to test if the integration works. When you click the "Sign In" button, the page should be redirected to a Logto sign-in page, and you should be able to create a new account by entering username and password and complete the sign-in process.

Add OAuth2 connector

To add a social connector, go to the "Connector" tab in the Admin Console, then click on "Social connectors". From there, click "Add social connector".

In the openning modal, select "OAuth2" and click "Next".

On the next page, you will see a two-column layout with the README content on the left and configuration on the right.

Feel free to follow the README file in place or read the following section to complete the configuration process. If you follow the in-place guide, you can skip the next section.

Set up Standard OAuth 2.0 app

Create your OAuth 2.0 app

When you open this page, we believe you already know which social identity provider you want to connect to. The first thing to do is to confirm that the identity provider supports the OAuth 2.0 protocol, which is a prerequisite for configuring a valid connector. Then, follow the identity provider's instructions to register and create the relevant app for OAuth 2.0 authorization.

Configure your connector

We ONLY support "Authorization Code" grant type for security consideration and it can perfectly fit Logto's scenario.

clientId and clientSecret can be found at your OAuth 2.0 apps details page.

clientId: The client ID is a unique identifier that identifies the client application during registration with the authorization server. This ID is used by the authorization server to verify the identity of the client application and to associate any authorized access tokens with that specific client application.

clientSecret: The client secret is a confidential key that is issued to the client application by the authorization server during registration. The client application uses this secret key to authenticate itself with the authorization server when requesting access tokens. The client secret is considered confidential information and should be kept secure at all times.

scope: The scope parameter is used to specify the set of resources and permissions that the client application is requesting access to. The scope parameter is typically defined as a space-separated list of values that represent specific permissions. For example, a scope value of "read write" might indicate that the client application is requesting read and write access to a user's data.

You are expected to find authorizationEndpoint, tokenEndpoint and userInfoEndpoint in social vendor's documentation.

authenticationEndpoint: This endpoint is used to initiate the authentication process. The authentication process typically involves the user logging in and granting authorization for the client application to access their resources.

tokenEndpoint: This endpoint is used by the client application to obtain an access token that can be used to access the requested resources. The client application typically sends a request to the token endpoint with a grant type and authorization code to receive an access token.

userInfoEndpoint: This endpoint is used by the client application to obtain additional information about the user, such as their fullname, email address or profile picture. The user info endpoint is typically accessed after the client application has obtained an access token from the token endpoint.

Logto also provide a profileMap field that users can customize the mapping from the social vendors' profiles which are usually not standard. The keys are Logto's standard user profile field names and corresponding values should be social profiles' field names. In current stage, Logto only concern 'id', 'name', 'avatar', 'email' and 'phone' from social profile, only 'id' is required and others are optional fields.

responseType and grantType can ONLY be FIXED values with authorization code grant type, so we make them optional and default values will be automatically filled.

For example, you can find Google user profile response and hence its profileMap should be like:

{
  "id": "sub",
  "avatar": "picture"
}

ℹ️ Note

We provided an OPTIONAL customConfig key to put your customize parameters. Each social identity provider could have their own variant on OAuth 2.0 standard protocol. If your desired social identity provider strictly stick to OAuth 2.0 standard protocol, the you do not need to care about customConfig.

Config types

Name	Type	Required
authorizationEndpoint	string	true
userInfoEndpoint	string	true
clientId	string	true
clientSecret	string	true
tokenEndpointResponseType	enum	false
responseType	string	false
grantType	string	false
tokenEndpoint	string	false
scope	string	false
customConfig	{ [key: string]: string }	false
profileMap	ProfileMap	false

ProfileMap fields	Type	Required	Default value
id	string	false	id
name	string	false	name
avatar	string	false	avatar
email	string	false	email
phone	string	false	phone

Reference

• The OAuth 2.0 2.0 Authorization Framework

Save your configuration

Double check you have filled out necessary values in the Logto connector configuration area. Click "Save and Done" (or "Save changes") and the OAuth2 connector should be available now.

Enable OAuth2 connector in Sign-in Experience

Switch to the "Sign-in experience" tab, then click the "Sign-up and sign-in" tab.

note:

If it's the first time you enter the tab, you will see a quick introduction about Sign-in Experience and its basic configuration.

Select "None" for the "Sign-up identifier" to provide minimum sign-up effort for OAuth2 sign-in, which may increase your conversion rate.

In the "Social sign-in" section, add "Add Social Connector" and choose "OAuth2". Then you should be able to see a button with text "Continue with OAuth2" in the preview section.

Finally, click "Save changes" on the bottom right corner.

Testing and Validation

Return to your .NET Core (Razor Pages) app. You should now be able to sign in with OAuth2. Enjoy!

Further readings

Protect your API For native and single page apps, you'll need to call one or more API endpoints to retrieve and update data.
Learn more about identifying who's who and keeping your API secure.

User management We know you care about user management and activities, as we also do.
Learn more about how to know your users and see the figures like DAU and MAU graphically.

Localization From one regional business to a global corporate, the willingness to offer the best user experience won't change.
You can change current language phrases or add a new language without friction.

Customer IAM series Our serial blog posts about Customer (or Consumer) Identity and Access Management, from 101 to advanced topics and beyond.